2-6GHz power divider for LTE/ 4/5 solution
2-6GHz power divider for LTE/ 4/5 solution,
RF passive components designer,
Description
Power Divider N-F Connectors Operating 2G-6GHz
Power Divider JX-PS-2G6G-02N is one type of RF passive components designed & produced for sale by Jingxin, which specially features with low insertion loss less than 0.5dB in small volume, measured only: 119mm x 50mm x 28mm (±0.2mm).
The frequency of this microwave divider covers from 2G-6GHz with the pass band of 50MHz, which works under the power of 300W. This power divider is produced with N-female connectors, but which can be switched to others according to the demand. With what powder spraying, such kind of power divider can bear in the field for long time.
As promised, all the RF passive components from Jingxin have 3 years warranty.
Parameter
|
Parameter |
Specification |
|
|
Dimension |
L x W x H: 119mm x 50mm x 28mm (±0.2mm) |
|
|
Port connectors |
N-Female (Material and Plating) |
|
|
Outer conductor |
Brass; Albay plating/Powder spraying |
|
|
Inner conductor |
Spring cooper; Ag 5 um plating |
|
|
Finish |
White, Akzo Nobel RAL9016, Powder spraying |
|
|
Fixation holes |
4xФ4.5；Material：Aluminum; Plating: Anti-Oxidation | |
|
Environmental conditions |
Outdoors |
|
|
Water Tolerance |
IP67 |
|
|
Vibration |
5G 5-200Hz,2.5G 5-2000Hz |
|
|
Shock |
20G 11ms (sawtooth pulse according AREMA 11.5.1) |
|
|
Altitude |
4200m |
|
|
Salt Mist |
EN 60068-2-11(ka Class ST4) |
|
|
Impedance |
50 Ohm all ports |
|
|
Humidity |
95%RH 2cycles à 24H 25°C to 55°C (according EN50155:2017 cyclic damp heat test 13.4.7) |
|
|
Notes |
Material shall be RoHS 6/6 and REACH compliant |
|
|
Frequency range |
2-6GHz |
|
|
Insertion loss |
≤3.3dB (type 3.1dB) |
|
|
Return Loss |
≥18dB (type 20dB) |
|
|
Isolation between output ports |
≥3.0dB |
|
|
Amplitude Balance |
±0.5dB (type 0.2dB) |
|
|
Phase Balance |
≤10° |
|
|
Power Rating |
300W |
|
|
Operating Temperature |
-40-85℃ |
|
Custom RF Passive Components
Only 3 Steps to Solve Your Problem of RF Passive Component
1.Defining the parameter by you.
2.Offering the proposal for confirmation by Jingxin.
3.Producing the prototype for trial by Jingxin.
