manufacturer of high frequency attenuators, custom design available
manufacturer of high frequency attenuators, custom design available,
,
Description
1/2/3/4/5/6/10/20/30dB High Frequency Attenuator Operating From DC-40GHz With 2.92 Connectors
High frequency attenuator JX-AT-DC40G-xdB is operating from DC-40GHz, available with the attenuation of 1/2/3/4/5/6/10/20/30dB, featuring with VSWR of 1.25, the working power of 2w, matching with 2.92 connectors. Its housing is Stainless Steel, measured in 2 sizes for the different attenuation. More detail is attached to the datasheet.
Jingxin can design the various RF attenuators for the applications. As promised, all the RF passive components from Jingxin have 3 years warranty.
Parameter
| Frequency range | DC-40GHz | |||||||||||||||
| Model number | JX-AT-DC40G-1dB | JX-AT-DC40G-2dB | JX-AT-DC40G-3dB | JX-AT-DC40G-4dB | JX-AT-DC40G-5dB | JX-AT-DC40G-6dB | JX-AT-DC40G-10dB | JX-AT-DC40G-20dB | JX-AT-DC40G-30dB | JX-AT-DC40G-40dB | ||||||
| Attenuation | 1dB | 2dB | 3dB | 4dB | 5dB | 6dB | 10dB | 20dB | 30dB | 40dB | ||||||
| Deviation (DC-26.5GHz) | ±0.5dB | ±1.0dB | ||||||||||||||
| Deviation (26.5-40GHz) | ±0.8dB | ±1.2dB | ||||||||||||||
| VSWR | ≤1.25 | |||||||||||||||
| Power | 2W | |||||||||||||||
| Impedance | 50Ω | |||||||||||||||
| Temperature range | -55°C to +125°C | |||||||||||||||
| Dimension | Attenuation 1-30dB: Size1 | |||||||||||||||
| Attenuation 40dB: Size2 | ||||||||||||||||
| Connectors | 2.92-Female to 2.92-Male | |||||||||||||||
| Interface | Comply With IEC 61169-35 | |||||||||||||||
| Durability | ＞2000 Cycles | |||||||||||||||
| Housing | Stainless Steel, Polished & Passivated | |||||||||||||||
| Center Conductor | Beryllium Copper, Gold Plated | |||||||||||||||
| Dielectric | PEEK | |||||||||||||||
| Nut | Stainless Steel, Polished & Passivated | |||||||||||||||
| Notes | Material shall be RoHS 6/6 | |||||||||||||||
Custom RF Passive Components
As a manufacturer of RF passive components, Jingxin can design various ones according to the clients’ applications.
Only 3 Steps to Solve Your Problem of RF Passive Component
1. Defining the parameter by you.
2. Offering the proposal for confirmation by Jingxin.
3. Producing the prototype for trial by Jingxin.
