2-6G Power Divider N-F Connector JX-PS-2G6G-02N

Item No.: JX-PS-2G6G-02N

Features:
- High Performance
- High Reliability
- IP67


Product Detail

Product Tags

Description

Power Divider N-F Connectors Operating 2G-6GHz

Power Divider JX-PS-2G6G-02N is one type of RF passive components designed & produced for sale by Jingxin, which specially features with low insertion loss less than 0.5dB in small volume, measured only: 119mm x 50mm x 28mm (±0.2mm).
The frequency of this microwave divider covers from 2G-6GHz with the pass band of 50MHz, which works under the power of 300W. This power divider is produced with N-female connectors, but which can be switched to others according to the demand. With what powder spraying, such kind of power divider can bear in the field for long time.
As promised, all the RF passive components from Jingxin have 3 years warranty.

Parameter

Parameter

Specification

Dimension

L x W x H: 119mm x 50mm x 28mm (±0.2mm)

Port connectors

 N-Female (Material and Plating)

Outer conductor

Brass; Albay plating/Powder spraying

Inner conductor

Spring cooper; Ag 5 um plating

Finish

White, Akzo Nobel RAL9016, Powder spraying

Fixation holes

       4xФ4.5MaterialAluminum; Plating: Anti-Oxidation

Environmental conditions

Outdoors

Water Tolerance

IP67

Vibration

5G 5-200Hz,2.5G 5-2000Hz

Shock

20G 11ms (sawtooth pulse according AREMA 11.5.1)

Altitude

4200m

Salt Mist

EN 60068-2-11(ka Class ST4)

Impedance

50 Ohm all ports

Humidity

95%RH 2cycles à 24H 25°C to 55°C (according EN50155:2017 cyclic damp heat test 13.4.7)

Notes

Material shall be RoHS 6/6 and REACH compliant

Frequency range

2-6GHz

Insertion loss

3.3dB (type 3.1dB)

Return Loss

18dB (type 20dB)

Isolation between output ports

3.0dB

Amplitude Balance

±0.5dB (type 0.2dB)

Phase Balance

10°

Power Rating

300W

Operating Temperature

-40-85

Power Divider N-F Connector

Custom RF Passive Components

As a manufacturer of RF passive components, Jingxin can design various ones according to the clients’ applications.
Only 3 Steps to Solve Your Problem of RF Passive Component
1.Defining the parameter by you.
2.Offering the proposal for confirmation by Jingxin.
3.Producing the prototype for trial by Jingxin.

Contact Us


  • Previous:
  • Next:

  • Leave Your Message